Teraterm Tips. News: Telnet Clients: Recommended Links: Teraterm Macros: Reference for macrolanguage. /M= Start Tera Term with macro. If this value is not a full path, it is understood as a relative path from ttermpro.exe. TTERMPRO TTERMPRO myhost.mydomain TTERMPRO myhost.mydomain:23 TTERMPRO myhost.mydomain 23. Using a Macro File to Configure a Data Radio Modem. Tera Term Macro files have an extension.TTL. When in install Tera Term, the.TTL extension will be associated with Tera Term, so anytime you click on a.TTL file, the Tera Term maco processor should run it. If it does not, you can manually associate the “TLL” file as described below.

Tera Term is easily one of the most powerful free Terminal Emulation Software that I have come across and the power of it lies in its scripting language TTL. Of-course, it is not as extensive and capability rich as Perl but for a non-programmer, a browse through a single help file on TTL language is all it takes to create wonderful scripts that could make his/her life easier in maintaining huge networks. The capabilities are limitless and if you could find better ways of enhancing the following script, please come forward and do your bit. The purpose of the script is for terminal configuration of repetitive commands in multiple terminal enabled devices at once but sequentially without human intervention. The other purpose of the script is to fetch terminal information from multiple terminal enabled devices at once but sequentially without human intervention. The script is primarily designed for working with Cisco devices which can be configured using terminal emulation and which has a Command Line Interface ( CLI ). The execution of the script requires Tera Term Software installed on the user’s computer.

The Tera Term software can be downloaded from the following URL: The Procedure for execution of the script is as follows: • Download Tera Term from the above mentioned URL. • Unzip and downloaded file and execute the Setup.exe file. • Install the Software in a specified destination. • Copy the below provided script in the Tera Term directory. • The script has an extension of.TTL and can be opened in notepad. • Open the file in notepad and change the variable ‘dirname’ in the script to reflect your Tera Term Directory. • Make two Text Files in the directory specified by the variable ‘dirname’ by the following names: ip.txt commands.txt • Make sure you have telnet access to all the devices you would like to configure.

• Open the ip.txt file and enter the IP addresses of all the devices for which the configuration needs to be fetched or pushed. Place only one IP address per line.

• Open the commands.txt file and enter the commands for configuration or commands for fetching configuration from the devices. Please note that the commands need to be compatible on all the devices entered in the ip.txt file. Please put in the commands in sequential order as you would configure the device in the normal circumstances. For eg: terminal length 0 show running-config config t enable secret cisco exit terminal length 24 write memory • Please place the commands that are required after authentication is done. The script expects a device prompt (which can be customized easily) by default after authentication. You may change it at any point of time.

• Execute the file ttpmacro.exe present in the Tera Term directory and select the macro '.ttl’ extension. • Please enter the Username for logging into the devices and press OK. The witcher 3 prima guide.